Product manual

Chapter 5: Management with the CLU
267
Viewing iSCSI Session Information
To view a list of iSCSI sessions:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI Sessions and press Enter.
3. Highlight the session you want and press Enter.
iSCSI session information includes:
• Session ID – ID number of the
session
• Status – Active or inactive
• Initiator Name – SCSI qualified
name (iqn)
• Portal IP – IP address of the
portal
• Device Type – Initiator or target
• Target Portal Group – ID
number
• TSIH – Target session
identifying handle
• Execution Throttle – Max
number of outstanding
commands on any one port
• Max Rcv Data Seg Length –
Receive data segment length
• First Burst Length – In bytes
• Default Time to Wait – In
seconds
• Immediate Data – Enabled or
disabled
• Header Digest – Enabled or
disabled
• CHAP Authentication Type –
None, Local, Peer
• Keep Alive – Enabled or
disabled
• Portal ID – ID number of the
portal
•Target Alias
• Target Name – iSCSI qualified
name (iqn)
• Initiator IP – IP address of the
initiator
• Initiator Source Port – ID
number
• ISID – Initiator session ID
number
• Max Outstanding R2T –
Number of PDUs ready to
transfer
• Max Burst Length – In bytes
• Default Time to Retain – In
seconds
• Initial R2T
– Enabled or
disabled
• Data Digest – Enabled or
disabled
• Data PDU in Order – Enabled
or disabled
• Data Seq in Order – Enabled or
disabled
• Device Access Control –
Enabled or disabled