Product manual

Chapter 4: Management with WebPAM PROe
171
• From the Choose a RAID level dropdown menu, choose the RAID level
of the LUN clone.
• From the Number of Copies dropdown menu, choose the number of
LUN clones you want to create.
You can make up to 8 clones of a LUN at a time.
• Check the box to the left of the Disk Array on which you want to create
the LUN clone.
5. Click the Next button and review your choices.
6. Click the Start button to begin the cloning process.
The cloning progress bar displays.
Note the Target Logical Drive ID. Use this number to identify the LUN clone
in the Logical Drive list.
If you chose a redundant RAID level, the LUN clone is automatically
synchronized after creation.
After the LUN clone is created, you can manage it like any other logical
drive. See “Making Logical Drive Settings” on page 166, “Locating a Logical
Drive” on page 167, and “Deleting a Logical Drive” on page 166.
For users to access the LUN clone, you must map it to an initiator. See
“Managing LUNs” on page 180.