Product manual
Table Of Contents
- VTrak Product Manual
- Contents
- Chapter 1: Introduction to VTrak
- Chapter 2: VTrak Installation
- Unpacking the VTrak
- Mounting VTrak in a Rack
- Installing Disk Drives
- Making Management and Data Connections
- Setting Up Serial Cable Connections
- Connecting the Power
- Chapter 3: VTrak Setup
- Chapter 4: Management with WebPAM PROe
- Logging into WebPAM PROe
- Choosing a Language
- Perusing the Interface
- Logging out of WebPAM PROe
- Working with the Storage Network
- Working with Subsystems
- Viewing Subsystem Information
- Saving a System Service Report
- Setting an Alias for the Subsystem
- Setting Redundancy for the Subsystem
- Setting Cache Mirroring for the Subsystem
- Setting Subsystem Date and Time
- Making NTP Settings
- Synchronizing with a NTP Server
- Viewing the Runtime Event Log
- Saving the Runtime Event Log
- Clearing the Runtime Event Log
- Viewing NVRAM Events
- Saving NVRAM Events
- Clearing NVRAM Events
- Viewing Current Background Activities
- Making Background Activity Settings
- Running Background Activities
- Running Media Patrol
- Running PDM
- Viewing Scheduled Activities
- Scheduling an Activity
- Deleting a Scheduled Activity
- Viewing Lock Status
- Setting the Lock
- Renewing the Lock
- Releasing the Lock
- Managing Users
- Managing the Network Connection
- Managing Fibre Channel Connections
- Managing SAS Connections
- Managing Storage Services
- Monitoring Performance
- Managing Software Services
- Exporting the User Database
- Exporting a Configuration Script
- Importing a User Database
- Importing a Configuration Script
- Updating the Firmware
- Viewing Flash Image Information
- Restoring Factory Defaults
- Clearing Statistics
- Saving a System Service Report
- Shutting Down the Subsystem
- Starting Up After Shutdown
- Restarting the Subsystem
- Managing Controllers
- Managing Enclosures
- Managing Physical Drives
- Managing UPS Units
- Managing Disk Arrays
- Viewing a List of Disk Arrays
- Creating a Disk Array
- Creating a Disk Array - Automatic
- Creating a Disk Array - Express
- Creating a Disk Array - Advanced
- Deleting a Disk Array
- Viewing Disk Array Information
- Making Disk Array Settings
- Creating a Logical Drive
- Deleting a Logical Drive
- Migrating a Disk Array
- Rebuilding a Disk Array
- Running Media Patrol on a Disk Array
- Running PDM on a Disk Array
- Transitioning a Disk Array
- Preparing a Disk Array for Transport
- Managing Logical Drives
- Managing Spare Drives
- Working with the Logical Drive Summary
- Chapter 5: Management with the CLU
- Initial Connection
- Running Quick Setup
- Managing the Subsystem
- Managing the Controllers
- Managing the Enclosure
- Viewing the Enclosures Summary
- Viewing Enclosure Information
- Making Enclosure Settings
- Viewing FRU VPD Information
- Viewing Power Supply Status
- Locating a Power Supply
- Viewing Cooling Unit Status
- Viewing Temperature Sensor Status
- Viewing Voltage Sensor Status
- Checking the Batteries
- Reconditioning a Battery
- Locating an Enclosure
- Viewing Enclosure Topology
- Managing Physical Drives
- Managing Disk Arrays
- Viewing a List of Disk Arrays
- Creating a Disk Array
- Creating a Disk Array - Automatic
- Creating a Disk Array - Express
- Creating a Disk Array - Advanced
- Deleting a Disk Array
- Viewing Disk Array Information
- Setting an Alias for a Disk Array
- Accepting an Incomplete Array
- Enabling Media Patrol and PDM on a Disk Array
- Preparing the Disk Array for Transport
- Rebuilding a Disk Array
- Migrating a Disk Array
- Running PDM
- Running Transition on a Disk Array
- Locating a Disk Array
- Creating a Logical Drive
- Deleting a Logical Drive
- Managing Spare Drives
- Managing Logical Drives
- Managing the Network Connection
- Managing Fibre Channel Connections
- Managing SAS Connections
- Managing Background Activity
- Working with the Event Viewer
- Working with LUN Mapping
- Managing UPS Units
- Managing Users
- Working with Software Management
- Flashing through TFTP
- Viewing Flash Image Information
- Clearing Statistics
- Restoring Factory Defaults
- Shutting Down the Subsystem
- Starting Up After Shutdown
- Restarting the Subsystem
- Making Buzzer Settings
- Chapter 6: Maintenance
- Updating the Firmware in WebPAM PROe
- Updating the Firmware in the CLU
- Downloading the Firmware Image File
- Updating the Firmware
- Restarting - Single RAID Subsystem, Telnet
- Restarting - RAID with JBOD Expansion, Telnet
- Restarting - Single RAID Subsystem, SSH
- Restarting - RAID with JBOD Expansion, SSH
- Restarting - Single RAID Subsystem, Serial
- Restarting - RAID with JBOD Expansion, Serial
- Replacing a Power Supply
- Replacing a Cooling Unit Fan or Blower
- Replacing a Cache Battery
- Replacing a RAID Controller - Dual Controllers
- Replacing a RAID Controller - Single Controller
- Chapter 7: Technology Background
- Chapter 8: Troubleshooting
- VTrak is Beeping
- LEDs Display Amber or Red
- CLU Reports a Problem
- WebPAM PROe Reports a Problem
- Event Notification Response
- Critical & Offline Disk Arrays
- Incomplete Array
- Physical Drive Problems
- Enclosure Problems
- Controller Enters Maintenance Mode
- Connection Problems
- Browser Does Not Connect to WebPAM PROe
- Unsaved Data in the Controller Cache
- Chapter 9: Support
- Appendix A: Useful Information
- Appendix B: Multipathing on Windows
- Before You Begin
- Installing PerfectPath
- Verifying Installation
- Running Perfect Path View
- Monitoring Your LUNs and Paths
- Features and Settings
- Troubleshooting
- Updating PerfectPath
- Repairing PerfectPath
- Removing PerfectPath
- Appendix C: Multipathing on Linux
- Index
Contents
ix
Chapter 5: Management with the CLU . . . . . . . . . . . . . . . . . . . . . . .165
Initial Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166
Making a Serial Connection . . . . . . . . . . . . . . . . . . . . . . . . . .166
Making a Telnet Connection . . . . . . . . . . . . . . . . . . . . . . . . . .167
Making a SSH Connection . . . . . . . . . . . . . . . . . . . . . . . . . . .167
Logging In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168
Accessing Online Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169
Exiting the CLU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169
Logging Out of the CLI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170
Logging Back Into the CLI and CLU . . . . . . . . . . . . . . . . . . . .170
Running Quick Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171
Managing the Subsystem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172
Setting an Alias for the Subsystem . . . . . . . . . . . . . . . . . . . . .172
Setting Redundancy for the Subsystem . . . . . . . . . . . . . . . . .172
Setting Cache Mirroring for the Subsystem . . . . . . . . . . . . . .172
Running Media Patrol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173
Locking or Unlocking the Subsystem . . . . . . . . . . . . . . . . . . .173
Setting Subsystem Date and Time . . . . . . . . . . . . . . . . . . . . .174
Making NTP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174
Synchronizing with a NTP Server . . . . . . . . . . . . . . . . . . . . . .175
Managing the Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176
Viewing Controller Information . . . . . . . . . . . . . . . . . . . . . . . .176
Clearing an Orphan Watermark . . . . . . . . . . . . . . . . . . . . . . .176
Making Controller Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .177
Locating the Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178
Managing the Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179
Viewing the Enclosures Summary . . . . . . . . . . . . . . . . . . . . .179
Viewing Enclosure Information . . . . . . . . . . . . . . . . . . . . . . . .179
Making Enclosure Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .180
Viewing FRU VPD Information . . . . . . . . . . . . . . . . . . . . . . . .180
Viewing Power Supply Status . . . . . . . . . . . . . . . . . . . . . . . . .180
Locating a Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . .181
Viewing Cooling Unit Status . . . . . . . . . . . . . . . . . . . . . . . . . .181
Viewing Temperature Sensor Status . . . . . . . . . . . . . . . . . . .181
Viewing Voltage Sensor Status . . . . . . . . . . . . . . . . . . . . . . . .182
Checking the Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182
Reconditioning a Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
Locating an Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183
Viewing Enclosure Topology . . . . . . . . . . . . . . . . . . . . . . . . . .183