Product manual

VTrak E-Class Product Manual
344
Transition
Transition is started
No action is required.
Transition is completed
Transition is paused Resume transition when ready.
Transition is resumed No action is required.
Transition is stopped If this action was not intentional, check
the disk array’s status.
Transition was switched to rebuild Replace the dead physical drive or
reinstall the missing drive.
Unknown
Unknown priority reason is detected If this message appears repeatedly,
contact Tech Support.
Zoning
Zoning permission settings with the
expander has been reset to defaults
No action is required.
Zoning expander has been rebooted.
Zoning permission settings with the
expander different than expected
Settings have been updated correctly.
No action is required.
Reported Event Corrective Action