Product manual

Chapter 4: Management with WebPAM PROe
137
For more information, see “Cache Policy” on page 289.
Locating a Logical Drive
This feature causes the drive carrier LEDs to flash for one minute to assist you in
locating the physical drives that make up this logical drive.
To locate a logical drive:
1. Click the Storage tab.
2. Click the Logical Drive icon.
The list of logical drives appears.
3. Mouse-over the logical drive you want and click the Locate button.
The drive carrier LEDs flash for one minute.Locating a logical drive.
Initializing a Logical Drive
Initialization is normally done to logical drives after they are created from a disk
array.
To initialize a logical drive:
1. Click the AdminTool tab.
2. Click the Background Activities icon.
The list of background activities appears.
3. Mouse-over Initialization and click the Start button.
4. Check the box to the left of the logical drive you want to initialize.
5. Choose the initialization option you want:
Note
The Write Cache is always set to WriteThru when Read Cache is
set to NoCache.
Warning
When you initialize a logical drive, all the data on the logical drive
is lost. Backup any important data before you initialize a logical
drive.
Green LEDs
flash