User manual

ConnectStor II User Manual
24
Configuring E-Mail Notification Options
Your ConnectStor II unit can send event notification messages to a designated email address
(typically the network administrator). Notification events include drive fail, low fan speed,
high temp., UPS power consuming, etc... The default for this setting is Disabled as shown
below:
Enabling E-Mail Notification
1. If you wish to send an email notice to a particular network supervisor or other user,
click the Enable E-Mail Notification radio button in the main information panel.
The screen below will appear:
2. Enter the E-Mail address of the individual mailbox receiving notification (such as
[e-mail]).
3. Enter the IP address and SMTP Server Port Number of your network's mail server in
the windows shown above.
4. Click the Submit button. A confirmation window will appear.
5. Click OK to confirm.