User manual

SATA150 TX2plus, TX4 User Manual
16
New Windows ME Installation
The following details the installation of the SATA150 TX Series drivers while
installing Windows ME.
1. Install the SATA150 TX Series controller card into your system.
2. Install Windows ME fully.
3. After installation, right-click on My Computer and select Properties from the
popup menu.
4. In the System window, choose the Device Manager tab.
5. In the hierarchical display under Other Devices is a listing for PCI RAID
Controller. Click PCI RAID Controller then click the Properties button.
6. In the Properties window, choose the Driver tab then choose Update Driver
and click Next.
7. Choose “Search for a better driver than the one your device is using now
(recommended)” then click Next.
8. Choose Specify Location then type A:\Win98-ME in the text box.
9. Insert the SATA150 TX Series driver diskette into the A: drive.
10. Click the Next button. A message informing you that “Win98-ME Promise
SATA150 TX Series Controller” should appear.
11. Click Next, then click Finish.
12. When asked if you want to restart your computer, click Yes. Immediately
remove the diskette from drive A:.