User manual

FastTrak S150 TX2plus

[Auto Setup Options Menu]

Optimize Array for: Performance

[ Auto Setup Configuration ]

Mode ....................................................................... Stripe

Spare Drive ............................................................. 0

Drives used in Array................................................ 2

Array Disk Capacity................................................. 160048

[ Keys Available ]

[↑] Up [↓] Down [←, →, Space] Change Option [ESC] Exit [Ctrl-Y] Save

Creating a Performance Array

FastTrak S150 TX2plus enables you to create striped or mirrored arrays with 1,

2, 3, or 4 drives.

To create an array for best performance, follow these steps:

1. Press the Spacebar to choose Performance under the Optimize Array for

section.

2. Press Ctrl-Y to Save and create the array.

3. Reboot your system.

4. Once the array has been created, you will need to FDISK and format the

array as if it were a new single hard drive.

5. Once the arrayed drives have been formatted, proceed to Chapter 4 of this

Manual to install your operating system and/or FastTrak driver.