Owner's Manual
11
Pull Chain
Extension
Pull Chain
Extension
ASSEMBLY INSTRUCTIONS
20
21
22
23
21. Attach the pull chain extension.
22. Attach pull chain extensions to the pull chains.
Note: The pull chain in the center of the light kit controls
the light.
23. Turn on the electrical power at the main fuse or circuit
breaker and the wall switch.
Installation is complete.
20. Remove the three switch housing screws from the
top edge of the light kit. Install the switch housing cap to
the bottom of the switch housing with the three switch
housing screws.
Switch
Housing
Screw
Switch
Housing Cap
Switch
Housing