Owner's Manual

9579 • 082520
Printed in
China
OPERATING INSTRUCTIONS
TROUBLESHOOTING
1-YEAR LIMITED WARRANTY
If you have diculty operating your remote, or have diculty with installation, please contact Customer Service : 1-877-706-3267, 8 a.m. - 5 p.m. Central Time.
WARNING: Ensure the power is turned o to the fan/remote before performing any maintenance.
LED indicator on the remote illuminates, but the remote won’t control the fan. The remote may need to be re-synced.
The remote is synced to the receiver at the factory. Occasionally, power surges can cause the remote to become un-synced. Whenever necessary, follow the syncing instructions
below.
SYNCING INSTRUCTIONS: Switch the power to the fan o and back on again. Within 30 seconds, press and hold the HIGH SPEED and LOW SPEED buttons (or the “LEARN” button,
located in the battery compartment) for 5 seconds. Fan will turn on at low speed and light o. This conrms the syncing process is successful.
The LED indicator on the remote does not illuminate.
The battery most likely needs to be replaced or it is not oriented correctly in the battery compartment. If battery is depleted rapidly, ensure one of buttons is not stuck in the
down position.
The LED indicator stays on.
Ensure one of buttons is not stuck in the down position.
Remote controls more than one fan.
Turn o the power to the fans you don’t want synced. Follow the syncing instructions listed above. Then, turn on the power to the other fans.
Dimming feature does not function.
Ensure the bulbs are incandescent or other dimmable bulbs.
Fan will not run at high speed. If your fan has manual pull chains to operate the fan speed, be sure the pull chain is manually set to HIGH SPEED. If your pull chain is set to LOW
or MEDIUM SPEED, the remote will not override the manual pull chain setting.
Light will not turn on. If you fan has manual pull chains, be sure the light pull chain is set to ON. The remote will not override the manual pull chain setting.
To obtain service, please contact Customer Service:
1-877-706-3267, 8 a.m. - 5 p.m. Central Time, Monday - Friday.
The manufacturer warrants all of its lighting xtures against defects in materials and workmanship for one (1) year from the date of purchase. If within this period the product
is found to be defective, take a copy of the bill of sale as a proof of purchase and the product in its original carton to the place of purchase. The manufacturer will, at its option,
repair, replace or refund the purchase price to the consumer. All costs of installation and removal of the xture is the responsibility of the consumer. This warranty does not cover
xtures becoming defective due to misuse, accidental damage or improper handling and/or installation and specically excludes liability for direct, incidental or consequential
damages. As some states do not allow exclusions of limitations on an implied warranty, the above exclusion and limitation may not apply. This warranty gives you specic rights
and you may also have other rights which may vary from state to state.
Front Back
LED Indicator
High Speed
Medium Speed
Low Speed
Fan O
Light On/O
Light Delay
LEARN
Button
Variable Breeze
Home Shield
To operate the fan using the remote, make sure fan pull chain is on high and light is
turned on. Then press and release the following buttons:
Fan O - Turns the power to fan o.
Light On/O - Turns the light on and o. Press and hold to dim or brighten lights
(for dimmable bulbs only).
High Speed - Turns on fan at high speed.
Light Delay - Light stays on for 60 seconds to allow for safe exit from room. Note:
Tap Light Delay once to activate. Fan light blinks once to conrm Light Delay is
active. Press any button to cancel.
Medium Speed - Turns on fan at medium speed.
Variable Breeze - Simulates a breeze in nature. Press and hold button to activate.
Press any fan speed button to cancel.
Low Speed - Turns on fan at low speed.
Home Shield - Simulates occupancy while away from home. Fan remains o and the
light randomly turns on for a minimum of ve times and a maximum of 20 minutes.
The light remains o for 60 minutes between events. Press and hold button to
activate. Light will blink twice to conrm Home Sheild is active. Press any button to
cancel.
LED indicator should illuminate when any remote button is pressed. If not, replace
the DC3V, CR2032 batteries.
LEARN button - Syncs remote to receiver (see TROUBLESHOOTING for instructions).
Note: To access LEARN button, remove battery door from back of the remote using a
at-head screwdriver.