Instruction Manual

Your camera can be configured to a custom trigger speed of Normal (0.7 seconds) or Fast (0.13

seconds). We recommend Normal for areas where game is moving slowly, such as feeding areas. The

Fast setting is typically used for monitoring trails.

Default Settings

This selection returns your camera back to the factory options for each setting (Except LTE Carrier)

Smart IR Video

Smart IR Video is a feature that will allow a daytime video clip to keep recording as long as the camera

detects movement during filming. If the subject stands still in front of the camera and the camera does not

detect movement, the camera will end the video clip. The maximum record time for a video clip using this

feature is 5 minutes.

SD Management

By turning this option on, the camera will erase the oldest pictures or videos on the SD card when it

becomes full. This allows for the camera to continue taking pictures or videos if you can’t get to the field

to swap out the SD card.

Delete All

By selecting Delete All, every image on the SD card is erased permanently. This function also keeps the

card formatted to the trail camera. We suggest using the Delete All function and reformat the SD card

each time it is installed in the camera for use.

IR Flash Power

Long Range: This option has a flash range of 80’ and uses a low glow infrared flash.

Economy: This is a great battery saving setting if you are in a heavily wooded environment, where flash

distance is limited.

LTE Feature

This setting allows you to turn the cellular function of the camera on or off. Leave the setting in the “LTE

Enable” setting to enable cellular communication.

LTE Info

This menu item displays the LTE IMEI, ICCID and LTE FW Version

LTE Carrier

This menu item displays the cellular carrier for this device.

Network Status

This menu item displays the signal strength

Server Status

This menu item displays the subscription quota.

LTE Test

This feature will allow you to run a cellular test in the field. Simply Press the ENTER button, and your

camera will make a cellular connection.

Capture Timer

This setting allows you to set a certain period of time for the camera to capture images. The default

setting is 24 hour, continuous monitoring. You can set the START and STOP times as desired, if you

want to skip a certain time period. The capture timer is most used in instances where a user may want to

pause picture or video recording of events during the day, and only record night time activity.

Firmware Upgrade

The Firmware Upgrade option allows you to upgrade your cameras firmware. If a firmware upgrade is

available for your camera it will be posted on our website, along with detailed instructions for upgrading.