Datasheet

ActivBoard+2 300 Pro SS 05-10-V7.0 UK
Product Specifications
interactive whiteboard system
300 pro
Range
Page 3
©2009 Promethean Ltd. All Rights Reserved. ActivBoard+2 is a trademark of Promethean Ltd. Any
third-party product and company names are mentioned for identification purposes only and may be
trademarks of their respective owners. All dimensions +/- 5mm (0.2in). All weights +/- 0.9kg (2lb).
www.prometheanworld.com Product Specifications are subject to change without notice.
Accommodates ActivBoards 378 Pro, 387 Pro and 395 Pro
Height-adjustable mount, with 600mm (24in) of adjustment from 400mm (16in) to 1000mm
(39in). Top limit stop is fitted if the full range of movement is not required/appropriate.
Height adjustment is powered by an electrical motor and is operated by using a remote control
unit attached to the stand.
Aluminium arm, extends 1670mm (67.5in) from the wall, adjusts with the height of the
Activboard reducing the need for specific re-calibration following height adjustment.
Min. 2.68m (105.5”) for full range operation
For ActivBoard, Projector and Actuator
Input Voltage: 24VDC
Max Load: 750N
Static Load: more than 750N
Speed: 40mm/s (no load), 25mm/s (750N)
Stroke Length: 600 ± 2mm
Retracted Length: 795 ± 2mm
End Mounting Dimension: H Type, ø10.1 hole, 6.3mm Slot
Limit Switch: Built-in
Duty Cycle: S2-10min
Temperature: -26˚- 65˚C
IP Degree: IP54
AC-DC Adaptor:
Input Voltage: 100 ~ 240VAC
Output Voltage: 29VDC
Current: 2Amp (4Amp protected)
Cable and Plug: 1.5m, IEC Plug
Approx. 58kg (127.9lb) excl. board, projector and cabling
Approx. 88kg (194lb) (when ActivBoard 378 Pro fitted)
Connectivity box with inputs for 2 x PC inputs (VGA & Audio RCA),USB input, S-video and
composite video, plus auxiliary audio RCA inputs. Box also has VGA switch for PC inputs and
volume control for audio output cable. Box is mounted to the frame and can be placed on either
side of the system. 2m (6ft) USB patch cable (to connect computer to face plate). 2m (6ft)
3.5mm Jack to RCA cable for PC audio input (to connect computer to face plate). 2m (6ft)
VGA cable provided in the projector box (to connect the computer to the face plate).
Box 1 of 4: 24kg (53lb)
Dimensions: 2020mm x 300mm x 220mm (79.5in x 11.8in x 8.7in)
Contents: Extrusions and boom assembly
Box 2 of 4: 27kg (60lb)
Dimensions: 1270mm x 1000mm x 170mm (50in x 39.4in x 6.7in)
Contents: Projector plate and accessories
Box 3 of 4: 15kg (33lb)
Dimensions: 1170mm x 250mm x 180mm (46.1in x 9.8in x 7.1in)
Contents: Actuator cover and frame cables
Box 4 of 4: 2.6kg (5.7lb)
Dimensions: 360mm x 250mm x 170mm (14.2in x 9.8in x 6.7in)
Contents: Cable wall box
Board Size
Height Settings
Projector Mount
Room Height Requirements
Integrated Power Management
Actuator
Weight (approx.)
Complete System Weight
Cable Kit Contents
Pack Weights & Dimensions
adjustable frame specifications