Specifications

- 70 -
Figure 11.-
Logo board location.
- Replace the current EPROM by the one included in the personalized logo.
Figure 12.-
EPROM position.
- Be sure the IC notch agrees with the one drawn in the silkscreen print of the
PC board.
- Carefully insert pins properly in the socket.
- In connecting the logo generating card again, special care is to be given in
matching all board pins with card connectors
(VERY IMPORTANT)
.
- Set the board fastening bar again.
- Lock the unit.
WARNING: PROMAX S.A. is not responsible for damages, whether in the logo
generator or the GV-698, occurred because of a wrong memory inserting in its
socket.
05/96 GV-698