Orbit Bluetooth™ Portable Stereo Speaker User Guide
Introduction The Orbit is a universal portable wireless stereo speaker. Its uniquely shaped round design and multi- colored collection offers more than just a fashion and portability, but outstanding audio performance. It has a universal 3.5 mm audio jack and Bluetooth™ connection that can play your tunes from any audio source, such as Tablet or a smartphone. Thanks to its rechargeable internal battery, you can take Orbit literally everywhere - in or outdoors and use all of its special functions.
Packing Contents: Orbit Micro-USB charging cable 3.5 mm Audio Cable User Guide Warranty Card Getting Started 1 2 3 4 5 1: Volume up: Short Press to increase volume 2: Volume down: Short Press to decrease volume 3: Play: Short Press – Play/Pause; Long press: Bluetooth™ pairing 4: Audio mode LED indicator: Default: blinks in blue while looking for connection Bluetooth™ pairing: red/blue flash alternately Bluetooth™ connected: solid blue AUX-in mode: solid red 5.
6 7 8 9 10 6. Charge Indicator Charging: solid red Fully charged: solid green 7. Micro-USB Charging Port 8. Aux-in Jack 9. Power on/off 10. Stereo Button: Long press to pair a second Orbit. Operation Instructions: To switch the Orbit ON, toggle the Power Button on bottom of the speaker. Pairing Orbit to your Device Long press the “Play/Pause” button to connect Orbit to your Bluetooth™ enabled smartphone/tablet/MID/MP3, etc.
Enable the Bluetooth™ on your device and browse for devices. When Orbit appears on your screen, select it. Wait for a few seconds; the speaker will then emit an indication sound and the Bluetooth™/ AUX LED will turn to solid blue. Your device is now paired to Orbit and you can enjoy your favourite music. Pairing two pieces of Orbit Turn on both speakers and long press the “STEREO” button of each speaker. The "STEREO" and "Bluetooth/AUX" LED will start flashing in green/blue while the speakers are pairing.
AUX-in Mode Play Use a 3.5mm cable to connect your Orbit to any device which has a 3.5 mm Audio jack. Simply plug in one of the ends in your Orbit and the other one into the audio jack of your device. The AUX LED will then turn to solid red and Orbit is ready to use.
