Beam 5200mAh Multi-function Power Bank with Electronic Lighter and Flashlight UV Beam Environmentally Safe User Guide
Introduction Go green with Beam, a one of a kind Power Bank with an electronic flameless lighter. Not only does this backup battery charge your smartphone but even helps you light things up when a source of fuel is not available. Additionally Beam features an emergency LED light and UV Light to check authenticity of bank notes. Beam, An all in one back up battery that meets your every need.
Features: • 5200mAh Backup Battery • Universal USB port to charge any kind of 1A USB powered device • Flameless and no fuel required electronic lighter • Environmentally safe • Over-current, Over-voltage, Over-charge and Short-circuit Protection • Ultra-bright LED emergency light • UV beam for counterfeit note checking Precautions Please read all safety instructions and warnings thoroughly before using this product. Improper use of this product may result in damage to this or attached products. 1. 2. 3. 4.
Appearance & Interface Description: 1. 2. 3. 4. 5. 6. 7. 2A output port 5V /0.
Operation Instructions: 1. Checking the remaining power left in Beam back-up battery Tap the Multi-Function button once to view the amount of power remaining in Beam. No. of LED’s Active 1 2 3 4 % of power remaining <=25% <=50% <=75% <=100% 2. Charging Beam back-up battery Plug the Micro-USB end of the charging cable provided into the Micro-USB charging port in Beam back-up battery. Connect the other end of the Micro-USB charging cable to a USB power adapter or computer USB port.
3. Charging USB chargeable devices using Beam There is 1 port available on Beam. Plug the USB cable into the USB output port on Beam back-up battery and the other end into the device. The device will now automatically start charging. Detach the USB cable once charging is complete. 4. Using the LED on Beam • Press the multifunction button twice to turn on the LED located on the front of the product. • Press the multifunction button twice again to turn off the LED located on the front of the product.
5. Using the UV light on Beam • Press and hold the multifunction button to turn on UV light located on the front of the product. 5.
