Code 8371 Made In China WWW.PROMASTER.COM | AIRFIELD, CT 06825 % [pro]master* Vertical Control Power Grip Congratulations on your purchase of the Pro Master Vertical Control Power Grip for the Canon 6D Mk 1. This battery grip will provide longer shooting times for your camera, comfortable photography when taking vertical-orientation shots, and 2 more stable overall camera rig which reduces the chance of shake and bur. To ensure proper operation, please read this manual thoroughly before using this product.
Part Names Specifications 1) Protective cap 2) Electrical contacts 3) Attachment screw 4) Alignment pin 5) Attach/detach knob 6) Battery holder release handle 7) Cover for optional AC cord 8) AF point selection button 9) AE lock / FE lock button 10} AF start button 11) Vertical grip operation switch 12) Shutter button 13} AF area selection button 14) Battery cover holder 15) Main dial 16) Strap connector 17) Tripod socket 18} LOPES Battery holder tray 19} Battery ports Power Source 2xLP-EG /LP-EBN batteries
Operation and Use of the Grip . Your camera must be turned ON for the grip to operate. When your camera is ON the grip may be switched ON or OFF by using the Vertical-grip operation switch (11). Please note, the grip will continue to supply power to your camera whether the vertical-grip operation switch is set to ON or OFF.
Installing The Batteries 6. Be sure the camera's switch is set to OFF before installing or removing batteries from the grip. Tum the Battery door release handle (6) to OPEN by rotating it counter-clockwise. Pull on the Battery door release handle (6} to slide the Battery holder tray (18} out of the grip. 7. Insert 1 or 2 LP-Es or LP-E6N batteries into the Battery holder tray (18). Be sure each battery's contacts face the middies of the Battery holder tray {(18) as shown in illustration 7 for proper fit. 8.
