Instruction Manual

Installing the Macro Ring Head on Your Lens
This kit includes 49, 52, 55, 58, 62, 67, 72 and 77mm lens adapter rings.
1. Choose the adapter ring that matches the thread size on your lens.
2. Screw the adapter ring into the lens threads until snug. Be careful not to overtighten.
3. Squeeze the mounting ring locks on the Macro Ring Head
4. Slip the back of the Macro Ring Head over the edges of the lens mounting ring.
5. Once in place, release the locks and make sure the flash head is secure.
6. The Macro Ring Head can also be mounted to a light stand or tripod with the 1/4-20 thread in the
bottom of the unit.
NOTE: Some lenses have front elements that rotate when autofocusing. In this case, it is recommended
that you use the lens/camera in the manual focus mode to prevent possible damage.