Instruction Manual

Understanding the LCD Panel
1. Battery Level Gauge
This icon appears in the top, left corner of the LCD panel. It is designed to
look like a battery. When all 3 bars are displayed inside the gauge the
batteries are at full power. As the batteries are drained each bar will
disappear one by one until the gauge is empty and the batteries are
exhausted.
2. Mode Indicator
The Mode Indicator is shown across the middle of the LCD panel and is identified as: LIGHT FLASH L R
A dot is displayed below one of the modes to show the RL100 current mode setting.
LIGHT indicates Constant Light mode.
FLASH indicates Flash mode.
L indicates Flash Mode Left side only.
R indicates Flash Mode Right side only.
3. Power Level Indicator
The lower portion of the LCD panel shows the power level
indicator inside of a rectangle, as illustrated. The power output
level is displayed both as a 7 bar gauge and numerically. It has a
range of -3.0 to +3.0. the power level setting always applies to the
current mode setting.