Instructions

The mentioned information is based on laboratory experiments and practical testing at 20°C and 85% RH. If the
temperature or humidity of the material, the substrate or the surroundings deviate from this, the product properties,
drying and curing times are affected. A general responsibility for paint treatment cannot be given, due to the many
caveats that may arise regarding the substrate, application method, etc. Where the consumption of a paint extend over
more batches, these should be intermixed to avoid sheen and shade differences. It is the user’s responsibility to always
obtain new and revised product sheets. We reserve the right to make changes without notice. We reserve the right for
printing errors. In case of inconsistency between language versions, the Danish version applies.
TDS og instruction
Promal A/S • Joachim Wellers Vej 27 • DK-7500 Holstebro
[phone]
• [e-mail] • www.promal.dk
Væg & facade 5 is an extremely durable and flat wall paint.
It provides a nice, clean and easy-to-clean surface that is both dirt
repellent and durable. Wall & Facade 5 can withstand scrubbing.
Areas of application
Exterior & interior walls, facades & ceilings. Wall & façade 5 is
suitable for high load areas, such as laundry rooms,
changing rooms, hallways etc.
Substrate
Substrate must be clean, dry rm, free from staining and suitable
for painting.
Porous, untreated substrate such as plaster, concrete etc. must be
primed with micro dispersion primer.
Staining substrates must be thoroughly cleaned, and primed with
suitable primer.
Treatment
Stir extremely well before and during use.
Apply with paintbrush, paint roll or sprayer.
Drying time between the coats must be min. 4-6 hours,
depending on ambient environment.
Expect application of minimum 2 coats of paint.
Consumption
Consumption depends on condition and absorption of present
substrate and colour.
• New paint on plaster, approx. 4 m²/l.
• Repaint/ refreshing of previously painted surface approx. 6-8 m²/l.
• Change of colour, approx. 4 m²/l.
When changing color from colored to white, it is advantageous to
prime with a light gray before painting with white. When painting over
decoration or repairs, paint those rst and then the whole surface.
It is an advantage to prime untreated wall-cover with a high build
primer-paint, prior to painting.
Type: Wall & facade painting
Areas of application:
Exterior & interior walls and facades
Binder: Acrylic
Density: Approx. 1,25 kg/l ISO 2811
Viscosity (at 20°C): cP 2800-3000
Gloss (v. 60° angle): Approx. 5, matt
Consumption: 5-8m²/l
Drying time: 4-12 hours,
depending on layer thickness,
absorbency of the substrate,
temperature, humidity and ventilation
Next coat (at 20°C - 85% RH):
When dry, but min. 4 hours
Curing time (at 20°C - 85% RH):
Fully cured after 7 days
Application temperature:
Developed for use at 10°C-25°C
Min. +10°C - Max. 30°C
(substrate and surroundings)
Humidity:
Best at 60%-65% RH
Min. 40% max. 80% RH
Cleaning tools:
Water and soap
Storage:
Store at +5°C-+25°C, not in
direct sunlight and inaccessible to
children
Shelf life:
Min. 24 months from production
date (Batch no. yymmdd) when stored
correctly
Packaging: 10 litre bucket
Colours: White
VOC value: <30 g/l
EU VOC limit value (2010):
Cat A/i: 30 g/l
CLP symbols: None
CLP signal word: None
MAL code: 00-1
Washable: class 2 EN13300
Permeability: class 1 EN 7783-2
Adhesion: GT≤1 jf. EN 2409
Document date: 20-11-2022
Væg & facade 5
Pure acrylic paint for interior & exterior use on walls & facades
Item no 172-001104 PR no 2360967