Use and Care Manual

VACUUM CLEANING

1. Ensure all bags and filters have been installed prior to using the vacuum.

2. Connect hose to top lid assuring you have pressed the friction fit hose firmly into place.

3. Correctly place shoulder straps on each shoulder and secure the waistband with hook and loop

strips.

Caution: If the waistband and both shoulder straps are not properly and securely in

place the unit could fall off your back causing damage or injury.

4. Select desired attachments and connect them to the hose or wand.

5. Power the unit on by pressing the switch located near the base of the right hand side of the unit.