Use and Care Manual

21
Post Motor Filter:
1. Post motor filter is located underneath the dirt bin and is only there as a failsafe in case anything was to not
get caught by the HEPA filter and dirt bin. Because of this the post motor filter rarely needs to be cleaned.
2. If it does need to be cleaned, while the dirt bin is off, simply lift the motor filter up and off of the vacuum.
3. Tap the filter off over a garbage can or use compressed air to blow off the filter.
4. Reinstall the filter once clean.
Suction Port Channel Cleaning
Note: Clean the suction port channel regularly to prevent any clogs
1. Remove dirt bin from vacuum to gain access to suction port. Review ‘Dirt Bin Emptying’ section for dirt
bin removal.
2. Place the vacuum with the suction port facing you and slide the locking tab to the left to unlock the suction
channel.
3. Pull the suction channel towards you so it folds down and away from the vacuum.