Use and Care Manual

19
De-Shedder Maintenance
1. Remove de-shedder attachment from the vacuum hose and make sure the comb attachment lock is unlocked
allowing the comb attachment to stand up.
2. Remove the comb attachment from the de-shedder. Review the ‘Comb and Guide Guard
Replacement’ section.
3. Clean the comb and de-shedder attachment using the provided maintenance brush. You can also use the
suction of the vacuum with the hose and crevice tool or a can of compressed air to clean these parts.
4. Reinstall the comb attachment, review the ‘Comb and Guide Guard Replacement’ section.
5. The de-shedder is now ready to use.
Filter Maintenance
HEPA Filter:
1.
Turn vacuum off and unplug from the wall outlet.
2. Remove dirt bin and empty if needed. Review ‘Dirt Bin Emptying’ section.
3. Once dirt bin is empty leave bottom cover open, reach inside the dirt bin and grab the HEPA filter and filter
cover. Twist counterclockwise and pull outward removing both parts from the dirt bin.