Manualshelf

Use and Care Manual

ManualsBrandsProlux ManualsAppliancesPet Groomer Bagless Corded HEPA Pet Multisource Black Canister Vacuum Groom and Trim with Brush and Clipper Attachments
11121314151617181920
Table Of Contents
18
Maintenance
Note: Clean the clipper blade and de-shedder attachment after each use.
Note: Make sure clipper is switched off before performing any maintenance.
Note: Do not rinse the clipper or blade with water to clean.
Clipper Maintenance
1. Remove clipper from vacuum hose and make sure the clipper’s ON/OFF switch is set to OFF.
2. Remove the clipper blade by using your thumb to press the blade out
and away from the clipper.
3. Clean the blade and clipper using the provided maintenance brush. You
can also use the suction of the vacuum with the hose and crevice tool or a can of
compressed air to clean these parts.
4. Reassemble the blade onto the clipper by inserting the bottom of the blade into the clipper and pressing the
blade into the clipper with light pressure. It will click, locking it into place.
5. Turn the clippers on and make sure the blade is working properly. The clippers are now ready to use.