For your safety, please read the owner’s manual in its entirety before use. Congratulations on purchasing your very own Prolux Pet Grooming Vacuum Cleaner. This high-end vacuum is designed to provide ample power and superior filtration. Keep your pet’s hair trimmed and looking great and make clean up a breeze in just a few easy steps. Prolux…. Cleaning Reinvented! Welcome to the Prolux family and don’t forget to register for your warranty at www.proluxcleaners.
Table of Contents Quick Assembly ............................................................................................................................. 4 Specifications ................................................................................................................................. 5 WARRANTY ................................................................................................................................. 6 IMPORTANT SAFETY INSTRUCTIONS .................................
Quick Assembly To view some videos on unboxing, assembling, and using your new vacuum you can find them at the link below, or scan the QR code to go to our YouTube page to see all our videos: htps://proluxcleaners.
Specifications • Lightweight - Vacuum weighs just 8lbs • Dependable - 3-year motor and 1 year body warranty • Washable HEPA filter gives you excellent filtration • 3 Speed Motor – Eco, Standard and Boost • 9ft+ Power Cord • 6.5ft+ Long Tool Hose • Powerful – 31 CFM on Eco, 37 CFM on Standard and 40 CFM on Boost • 3.
WARRANTY Here at Prolux we take pride in the quality of our products, so much of our time and money is spent on R&D rather than advertising. Because of this we feel very confident in the quality of our products and feel very comfortable being able to offer a 3-year motor warranty and a 1-year body warranty. We only require that you MUST register your machine within 90 days of purchase. If a machine is not registered then we will only offer a 1-year warranty, which will cover both the motor and body.
IMPORTANT SAFETY INSTRUCTIONS Vacuum Safety Read the owner's manual in its entirety before using this product. Failure to do so can result in serious injury or death. Prolux takes no responsibility for damages/injuries due to violations of the following operating instructions. To reduce the risk of fire, electric shock, or injury: Keep this operating manual for reference. Include the operating manual if you pass the appliance to third parties.
• If the appliance fails to work properly, is damaged, stays outdoors for a long time, or is dropped into water, please contact customer service. If water enters any electrical components inside the product, please disconnect the power plug. • Do not use when the power cord or power plug is damaged. • Do not suck up toxic substances (chlorine bleach, ammonia, drainage detergent, etc.) with this appliance.
Description of Parts 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
Assembly and Operation Important: For the best results do not use the vacuum without all filters and dirt bin properly installed. Use for dry pets ONLY! 1. Remove everything from box and lay in easy view. 2. 3. Ensure filter is installed and dirt bin is locked in place. Place the main unit on a level surface and attach the hose to main canister. The hose is friction fit so it can be pushed into the vacuum’s suction port and kept in place with friction. Select proper attachments for current task.
Attachment Overview Operation Prolux is proud to include the highest quality attachments available! Through research and development and trial and error… Prolux has finally perfected vacuum attachments, matching durability with functionality! This is Cleaning…Reinvented! • De-Shedder - Quickly and easily remove loose hair for long and short haired dogs and cats. Effectively reduce shedding by up to 95% and help with the removal of fleas. Should be used with De-Shedder comb attachments.
Vacuum Speed Options The 4 in 1 Pet Grooming Vacuum comes with 3 power/speed options based on what type of grooming you’re currently doing.
De-Shedding Note: During use, please pay attention to the comb attachment edge, do not use excessive force which can cause scratches to the skin. Note: Push comb cleaner button regularly during use to clean off built up hair on comb attachment Tip: Placing the vacuum unit further away from your pet will lessen the amount of noise being introduced to your pet, so if your pet is skittish, we would recommend doing this until they get used to the vacuum sound. 1.
Hair Clipper Note: Do not touch the blade if the guide guard is not installed. Note: Please be careful on the soft parts of the pet's skin and do not use excessive force which can cause scratches to the skin. Note: Clipper attachment will require (2) AA batteries which are sold separately. 1. Attach the clipper attachment to the hose end and select which guide guard is preferred. We would recommend starting with a longer guide option and testing the length.
4. Press down on the comb attachment and pull outward to remove it from the deshedder. 5. To replace the comb attachment put the right side of the attachment in first with the pointy end facing you. 6. Push the right side of the comb into the yellow panel and insert the left side of the attachment into the notch cut into the left side of the de-shedder attachment opening until it locks into place.
To change the clipper guide guard: 1. If the clipper has a guard installed already you can unlock the guard by pressing upward on the back of the guard. Press upward and this will unlock the guard from the clipper and allow you to then slide the guard off removing it from the clipper blade. 2. To install a guard, slide the back of the guard onto the clipper blade first, and into the notches cut into the sides of the clipper end. Slide the guard down the notches until it locks into place.
Dirt Bin Emptying 1. Turn vacuum off and unplug it from the wall outlet. 2. Unlock dirt bin by pressing the bin unlock button on top of the vacuum. 3. Grab the dirt bin by the top handle and lift the bin off the vacuum body. 4. Hold dirt bin over a garbage can or other receptacle and press the dirt bin bottom cover release button. The bottom cover will open allowing the dirt bin contents to be emptied. 5. Once empty close the bottom cover locking it back in place. 6.
Maintenance Note: Clean the clipper blade and de-shedder attachment after each use. Note: Make sure clipper is switched off before performing any maintenance. Note: Do not rinse the clipper or blade with water to clean. Clipper Maintenance 1. Remove clipper from vacuum hose and make sure the clipper’s ON/OFF switch is set to OFF. 2. Remove the clipper blade by using your thumb to press the blade out and away from the clipper. Clean the blade and clipper using the provided maintenance brush.
De-Shedder Maintenance 1. Remove de-shedder attachment from the vacuum hose and make sure the comb attachment lock is unlocked allowing the comb attachment to stand up. 2. Remove the comb attachment from the de-shedder. Review the ‘Comb and Guide Guard Replacement’ section. 3. Clean the comb and de-shedder attachment using the provided maintenance brush. You can also use the suction of the vacuum with the hose and crevice tool or a can of compressed air to clean these parts. 4.
4. Grab the HEPA filter inside the filter cover and pull the filter out. 5. The filter can be cleaned by tapping it over a garbage can or other receptacle. A can of compressed air is 6. 7. 8. 9. also a great way to clean the filter. Any built up dust on the filter cover can be wiped off or blown off with compressed air. Insert the cleaned HEPA filter back into the filter cover and insert the filter cover back into the dirt bin.
Post Motor Filter: 1. 2. 3. 4. Post motor filter is located underneath the dirt bin and is only there as a failsafe in case anything was to not get caught by the HEPA filter and dirt bin. Because of this the post motor filter rarely needs to be cleaned. If it does need to be cleaned, while the dirt bin is off, simply lift the motor filter up and off of the vacuum. Tap the filter off over a garbage can or use compressed air to blow off the filter. Reinstall the filter once clean.
4. Pull the channel up and out of the vacuum which will allow you to clean the channel thoroughly if needed. 5. Reinstall the channel into the vacuum by inserting the tabs on the bottom of the channel back into the slots on the vacuum, push channel back up into place and slide the locking tab back to the locked position. 6. Reinstall the dirt bin, and the vacuum is ready to use again.
Dirt Bin Cleaning 1. 2. 3. 4. After emptying the dustbin contents, you can then remove the HEPA filter and filter cover. Use a damp microfiber cloth to wipe away dust and debris inside the bin. Leave the dirt bin apart to dry completely before reassembling. Once dry reassemble and put dirt bin back on vacuum. Storage Before storing your vacuum, empty and clean the tank, filter, and accessories. The hose and cord can be wound up and stored on the vacuum body in their designated areas.
Frequently Asked Questions 1. Why is my vacuum not picking up? • Vacuum dirt bin is full. Check the dirt bin capacity and empty if needed. • Clog in the hose or attachment. Remove the hose from the vacuum. Separate the hose from the attachment. Check for clog. If a clog is found using compressed air at a low pressure is the ideal means of removal. • Clogged filter does not allow proper airflow. Remove and clean your filter by lightly tapping on the edge of a garbage can (preferably outdoors).
Troubleshooting WARNING: Never use a defective appliance. Always switch the appliance off and disconnect it from the outlet before you start to troubleshoot. Fault The vacuum will not turn on. Suction power is low. Possible Cause(s) The plug is not Insert the plug into an electrical wall outlet and flip the connected to the “on/off” switch to the “on” position. electrical wall outlet or the appliance is not switched to the “on” position. Electrical wall sockets do not carry current.
Warranty Why do I have to register my warranty within 90 days to get my Warranty? Great question! Do you know what normally kills a vacuum cleaner? 1. Vacuum Dirt Bin being overfilled which causes the motor to overheat. 2. Improper cleaning and not replacing filters, which overheats the motor. 3. Improper maintenance: such as not regularly clearing hair and carpet fibers that wrap around it, overheating the motor.
LIMITED WARRANTY When registered, Prolux warranties this product’s motor free from defects in material and workmanship for three (3) years on the motor, and one (1) year on the body of the cleaner, free from manufacturer defects in material and workmanship from the original date of purchase, when utilized for normal use. What is Not Covered by the Prolux Warranty - Warranty Exclusions: This limited warranty does not extend to and expressly excludes: 1.
