Warranty

- 9 -
MAINTINANCE & CLEANING
***WARNING: ALWAYS RINSE YOUR PROLUX CARPET CLEANER TANK WITH
CLEAN WATER AFTER EACH USE & RUN A HALF TANK OF CLEAN WATER ONLY (NO SHAMPOO)
THROUGH THE MACHINE/SPRAYER AFTER EACH USE FOR 10 SECONDS, THEN EMPTY THE TANK
TO AVOIDE DAMAGE TO THE PUMP, & VOIDING THE WARRANTY***
TO CLEAN YOUR SHAMPOOER AFTER USE, FOLLOW THE INSTRICTIONS BELOW.
1. Lift the tank from the unit and unscrew the cap.
2. Pour the remaining solution out of the tank, and then rinse the tank/cap with clean
water. ***After this step, fill the tank half way with clean water and run the
unit/sprayer for 10 seconds, then empty the tank. This will avoid damage to the
pump, and avoid voiding your warranty***
3. Remove the clear nozzle cover from the front of the unit by releasing the nozzle cover
latch, and then rinse the cover with clean water.
4. After rinsing, reinstall the clear cover and lock it back into place by closing the nozzle
cover latch.
5. Insert the water-safe pump handle into the solution channel (located under the solution
tank) to remover/suck any residual solution that is remaining, to prevent future
blockage in the channel.
6. Reinstall the cleaned solution tank with the cap installed.