Use and Care Manual

1. Unplug the unit, then pull the front cover off and lift upwards so the

front cover will come off.

2. Remove the pre-filter by pressing down on the two fasteners at the top

of the filter. The filter is then removed.

3. Pull the HEPA filter towards you and remove it.

4. Pull the Carbon Odor Filter towards you and remove it.

Assemble the Air Purifier

For Installation of the Air Purifier filters, follow the previous steps in

reverse.

To install the cover back on the Air Purifier, follow these steps:

Align the two fasteners at the bottom of the front cover in the 2 holes on the Air Purifier

unit.

Cleaning and maintenance

1. Cleaning the outside of the unit: Unplug unit from wall. Wipe unit with soft cloth and

warm water. Remove front panel and clean inside if necessary. Ensure that the machine

is completely dry before using it again.

2. Cleaning Pre-filter: Pre-filter’s purpose is to filter out larger debris in the air. It is

important to keep this filter clean otherwise the performance of the Air Purifier may