Use and Care Manual

7
3. Anion switch - Anion Air Purifier device is installed in the machine and it can release
millions of anions to the air which helps clean the air and reduce allergens. Press
ANION button and anion indicator light is on, displaying in blue. Anion function is
in ON state at this time. Press ANION button again and anion indicator light is off, then
anion function is in OFF state.
4. Air speed - Three speed modes are contained in this unit: Sleep Mode (very quiet),
Auto mode (used during the day), and Standard mode (used in dirty rooms or full power
cleaning). The default mode is the automatic mode, but to change the mode simply press
the Air speed button. In sleep mode all the indicator lights will turn off after 30 seconds.
Press air speed button again and the red air speed standard mode indicator light is ON.
At this time the machine transfers into high speed status. If the sleep mode has been on
for 12 hours, the air purifier will automatically turn OFF.
5. Countdown timing- This function is used to turn off the Air Purifier after a specific
period of time. Press Countdown timer button and countdown timing device starts at this
time. To change timer to a different time simply press the Countdown timer button again.
The options are 1 hour, 4 hours, and 8 hours.
How to Use
To use the unit simply assemble the unit as instructed. Make sure all filters
are installed with no plastic packing around them. Plug the unit into a live
120 volt wall outlet and press the ON button. The unit will then begin to
purify air. You may then choose which air purifying mode to use.
Disassemble the Air Purifier
1. 2. 3. 4.