Use and Care Manual
- 8 -
7. Carpet/Floor Brush
8. Crevice Tool
9. Upholstery/Pet Hair tool
10. Dusting Brush
12. Upper Attachment Wand
12. Lower Attachment Wand
13. On/Off Power Switch
14. Additional tool storage
15. Easy Access cord storage
OPERATION INSTRUCTIONS
Assembling your vacuum
NOTE: Always remove the power plug from the wall outlet before assembling or removing accessories
" ATTACHING THE FLEXIBLE HOSE & ATTACHMENT WANDS TO THE VACUUM
The flexible hose should be connect before strapping the unit to your back
1. To connect the flexible hose to the unit slide the hose connector over the air inlet. (Fig 1)
2. To connect the flexible hose the attachment wands, slide the attachment end of the hose connection over the
upper attachment wand. (Fig 2) Then take the upper attachment wand and insert it into the lower attachment
wand. (Fig 3)
3. Plug the power cord into the electric outlet.
4. To remove the flexible hose, unplug the power cord and follow the instructions above in reverse.
WARNING
To reduce the risk of electric shock, the power cord must be disconnected before
removing the dust container, changing the filters or performing maintenance or
troubling shooting checks