Use and Care Manual

- 8 -
OPERATION INSTRUCTIONS
Assembling your vacuum
NOTE: Always remove the power plug from the wall outlet before assembling or removing accessories
" ATTACHING THE FLEXIBLE HOSE & ATTACHMENT WANDS TO THE VACUUM
The flexible hose should be connect before strapping the unit
1. To connect the flexible hose to the unit slide the hose connector over the air inlet. (Fig 1)
2. To connect the flexible hose the attachment wands, slide the attachment end of the hose connection over the
upper attachment wand. (Fig 2) Then take the upper attachment wand and insert it into the lower attachment
wand. (Fig 3)
2. Plug the power cord into the electric outlet.
3. To remove the flexible hose, unplug the power cord and pull out the hose connector from the air inlet.
WARNING
To reduce the risk of electric shock, the power cord must be disconnected before
removing the dust container, changing the filters or performing maintenance or
troubling shooting checks