Use and Care Manual

- 8 -
1. Insert the handle (Fig. 3/1) into the upper end of the
telescopic tube (Fig 3/2).
2. Attach the floor nozzle (Fig. 3/3) to the bottom end of the
telescopic tube (Fig 3/4).
NOTE: Shove all the way together and firmly twist to the right to
connect pieces.
3. Adjust the length
of the telescopic tube. Press down the release latch on the tube
to do this (Fig. 4/1). Then pull the handle of the telescopic tube
to extend it to your desired length (Fig. 3/1). Let go of the release
catch while pulling until it locks in place. You will hear a distinct
click.
Fig 3 Fig 4 Fig 5 Fig 6
! MANUAL SUCTION CONTROL
Your vacuum cleaner includes a manual variable suction control on the flexible hose handle. The suction power
can be adjusted by moving the suction regulator to the desired position between open and closed. (Fig7)
Open gives you less suction, closed provides maximum suction. For example, less suction is required on
upholstery and draperies compared to thick carpets, which required maximum suction.
Fig 7
! USING YOUR VACUUM
1. Insert the power plug into the wall outlet
2. Connect hose and telescopic tube if desired.
3. Correctly place shoulder straps on each shoulder and secure the waistband strap. (Fig 8 through Fig 8b)
Caution: If the waistband and both shoulder straps are not properly and securely in place, the unit could fall off