Use and Care Manual

- 11 -
BATTERY PROTECTION FEATURE
The 25.2-volt Lithium Polymer batteries are designed with features that protect the Lithium Polymer cells
and maximize battery life. When the battery has reached its minimum voltage level the electronics will
shut off the battery. Once the battery shuts off, it must be recharged.
PREPARING BATTERY PACK FOR CHARGING
1. Turn off the power switch. Confirm the switch is on the off position.
2. Unlock the battery pack from the vacuum by pulling up on the metal battery hook located on the top of
the battery, and take the battery pack out from the vacuum. (Fig 17)
3. Plug the round connector on the charger’s cord into the battery pack. (Fig 18)
4. Plug the charger’s power cord into 120V wall outlet (Fig 19)
5. The Battery pack may require approximately 8 hours to full charge.
Note: Battery pack may get warm while charging.
Before you assemble the battery pack back into the vacuum, please check the on/off switch is on the off
position.