Use and Care Manual

2. Cleaning the Filters. Follow directions #1 above. Once the dirt chamber cup is released
then twist the filter chamber in the direction shown below to gain access to the vacuum's
filters. First do #3 and then do #4.
When the filters have been removed clean the filter chamber cones as well as any filters.
Tapping filters on garbage can or blowing compressed air through filters can clean and extend
the life of the filters.
3. Cleaning the brushroll. Keeping the brushroll clear of string and other debris allows the
vacuum to clean better and extends the life of vacuuming time before recharges. It also
extends the life of the battery. To clean the brushroll first turn the vacuum off and flip the
unit upside down so you can see the brushroll. Remove the brushroll as shown in the
images below. A flat head screw driver will be required to unlock the screws on the
brushroll plate. After removing all debris follow directions in reverse to reinstall. When
installing the brushroll make sure the brushroll is level and it is inserted all the way.