Use and Care Manual

How To Use the Prolux Ion Stick Vac
Once the vacuum cleaner has been properly assembled and battery fully charged simply follow
the steps below to use the vacuum.
1. For the convenience of storage or cleaning you may fold the handle of the unit back as
shown in the picture below. To do this press down the release button of handle and at the
same time fold the handle to the back of the main body by turning it according to the
direction shown in the image below. To make the handle straight again reverse those
steps until it “clicks” bank into place.
2. The Electric Floor Brush with a spinning brushroll can be used on tile, hard floor surfaces,
and carpet. Some types of hardwood floors may be able to be scratched. Although the
brushroll on the vacuum is designed to not make contact with hardwood floor, you should
always make certain the brushroll won’t scratch your hardwood floors before using it on
hardwood. The Prolux Ion Stick Vac is designed to quickly and easily clean and vacuum
ALL floor types.