Use and Care Manual

1. Turn On/Off the machine

2. After the Air Purifier is turned on the Air Purifier will make a small sound. The machine is

now in stand-by mode with all indicator lights on.

3. 3 seconds after the unit powering on the machine is in normal operating state as shown in the

image.

4. If you need to shut down the Air Purifier simply press the ON/OFF button.

NOTE – The first time you use the unit or if it has been some time after its first use, the display settings

showing how clean or dirty the air is, may not be accurate. After 60 minutes of use, settings should be

accurate. If after 60 minutes of use they are still not accurate wipe down and clean sensors on the unit.

Ionic Cleaning Operation

Air Cleaning by positive and negative ion generator is built into the air purifier, and can release

millions of positive and negative ions into the air. The benefit to releasing positive and negative ions

into the air is it can kill bacteria and clean and sterilize the air.

1. To turn on Ionic Sterilization simply press the Ion Cleaning button.

2. After the Ionic Cleaning button is pressed the Ionic indicator will light up, notifying the user

that the Air Purifier is now cleaning with Ionic Sterilization.

3. To turn off Ionic Sterilization the user may simply press the Ionic Cleaning button and when the

indicator turns off for Ionic Sterilization it is no longer cleaning with Ionic Sterilization.