Prolux Enfinity Air Purifier Owners Manual Read Complete Manual before Operating
Congratulations on your purchase of your new Prolux Enfinity 5 Speed Air Purifier with 7 Year warranty! It is designed to be your answer to improve allergies and keep the air in your home pure and clean. Unlike other air purifiers that use standard motors with brushes (that wear out) the motor design of the Prolux Enfinity is brushless and is designed to never wear out. Its powerful 5 speeds allow it to be used while you’re sleeping (very quiet in sleep mode) to super powerful for maximum cleaning.
Index Page Product Specifications ......................................................................................................... 3 Description of Parts............................................................................................................... 4 Safety Instructions ................................................................................................................ 5 Assembly Instructions ............................................................................
DESCRIPTION OF PARTS
SAFETY INSTRUCTIONS • Before using the product, please carefully read the user manual and keep it for future reference. • Do not disassemble, repair or refit the machine by yourself. Unauthorized disassembly and repair may cause damage and dangers; an unauthorized refitting may cause fire hazards or damage to the product. • To avoid shock do not operate the Air Purifier with wet hands. • Use only with 120 volt power outlets. • Do not damage the power cord.
• Do not use the machine at any place where a large amount of smoke is generated, e.g. kitchen or any place with combustible gas, corrosive gas and metal dust particles, to avoid fire or defects. • All repairs and service work (including cord repairs) must be done by an authorized service center. • Do not allow the Air Purifier to come in contact with steam. Steam could cause an electrical default in these devices. Do not clean the Air Purifier if steam comes in contact with the wires and switches.
1. Turn On/Off the machine 2. After the Air Purifier is turned on the Air Purifier will make a small sound. The machine is now in stand-by mode with all indicator lights on. 3. 3 seconds after the unit powering on the machine is in normal operating state as shown in the image. 4. If you need to shut down the Air Purifier simply press the ON/OFF button.
3 Cleaning Modes The unit comes with 3 modes; 1. Silent Mode - This mode is for sleeping. When selected the display on the screen shall power off and the air purifier will run quieter. 2. Smart Mode - In this mode when lights are turned off in the room, 30 seconds later the air purifier will enter Silent mode. The display on the screen shall power off and the air purifier will run quieter.
4. High Speed – setting is SMART mode and HIGH Speed. 5. Very High Speed – setting is MANUAL /HIGH mode and High speed. As fan speed increases so will the bars on the indicator (as shown in the image below) Timing Mode The Prolux Enfinity is equipped with a timing mode that allows the unit to run up to 12 hours and then turn off. When users press the button the indicator will show “01” meaning 1 hour timer. When user presses the button again it will show “02”.
Positive & Negative Ion Generator – Positive & Negative Ions are used to kill peripheral bacteria and help purify the users air. NOTE- When using the Air Purifier for the first time be sure to remove all packing and materials from around the filters. REMOVING AND INSTALLING THE FILTERS FOR THE AIR PURIFIER First make sure the unit is unplugged from the wall outlet. Take the air purifier and turn it upside down on a soft couch (so the LCD screen is on a couch cushion and does not scratch).
Fig 1 Now remove the bottom plate to gain access to the filter chamber (fig. 2). Fig 2 Remove (or insert if you are putting filters in) the filters to the unit as shown in the image (fig. 3). If you are inserting your filter: After you have inserted the filter put the bottom plate back on and turn the rotary knob clockwise until it is snug and the bottom plate is securely in place. With the filter installed correctly the unit is now ready to be plugged in and operated.
Wipe dirty marks by using a soft cleaning cloth that is damp with warm water. purifier again if the water or moisture used in cleaning has completely dried. Only use the air For best results in cleaning it is best to keep the filters clean. It is suggested that the user cleans the filter at least every 6 months of use and replace the filter when the indicator says.
NO AIR IS EXHAUSTING OUT OF THE UNIT – First make sure the unit is powered on and motor is turning. If the problem is still not solved then check for blockages or debris in the exhaust ports. If air amount seems low clean the filter. If this still does not solve the problem then contact your authorized service center. UNIT DOES NOT SEEM TO BE CLEANING LIKE IT SHOULD – Check to make sure unit is placed in the correct place for maximum cleaning effect.
- Incorrect use, e.g. overloading of the appliance, use of non-approved accessories, using the unit outside. - Use of force, damage caused by external influences. - Damage caused by non-observance of the user manual, e.g. connection to an unsuitable electrical wall outlet or non-compliance with the installation instructions or being dropped. - Partially or completely dismantled appliances.
