Use and Care Manual

- 10 -
Troubleshooting
WARNING: Never use a defective appliance. Always switch off the appliance and disconnect it from the
outlet before you start to troubleshoot.
Fault
Possible Cause(s)
Solution
The unit will not turn on.
1. Not Firmly plugged into
plug.
2. No voltage in plug
3. Malfunction for start
capacitor
1. Plug unit firmly into
extension cord plug
2. Check fuse or breaker
3. Replace it
Severe Bouncing of Machine
1. Using brush on dry
surface without dry
shampoo or wet
shampoo
2. Brush or pad holder not
properly in place
1. Apply necessary
shampoo
2. Properly place
Hearing irregular noises
1. Pin is loose
2. Chassis screw is loose
1. Check and tighten if
needed
2. Check and tighten if
needed