Use and Care Manual

·In order to get better polishing and cleaning effect, please uniformly polish every square yard of ground for
more than one minute.
·Do not clean the Fine Polishing Seat with water to avoid degumming.
Installation of Parts to Assemble Unit
· Installation of handle part and extension pipe:
Insert the 2 handle parts to the mounting hole until hearing “click” sound as shown in the image below.
· Connection of Rough Polishing Brush Disc (or Fine Polishing Seat) to the Polishing head
Hold the Rough Polishing Brush Disc (or Fine Polishing Seat) by hand and make it align to the Rough Polishing
Brush Disc (or Fine Polishing Seat) with the special section hole of the gear on the waxing head. Press the
Rough Polishing Brush Disc (or Fine Polishing Seat) to the Polishing head, as shown in the arrow in the image
below, until hearing “click” sound.
(If needing disassembling, apply pulling force to the Rough Polishing Brush Disc (or Fine Polishing Seat)