Use and Care Manual

- 8 -
1. Main motor unit
2. Flexible electric power hose
3. Dust container
4. Shoulder straps
5. Exhaust HEPA filter
6. Air inlet Vortex filter
7. Carpet/Floor Brush
8. Crevice Tool
9. Upholstery/Pet Hair tool
10. Dusting Brush
11. Electric Telescopic wand
12. Self-Cleaning Filter Cone
13.Deluxe electric power nozzle
14. Additional Tool Storage
15. Easy Access Cord Storage
OPERATION INSTRUCTIONS
Assembling your vacuum
NOTE: Always remove the power plug from the wall outlet before assembling or removing accessories
n ATTACHING THE FLEXIBLE HOSE & POWER NOZZLE TO THE VACUUM
The flexible hose should be connected before strapping the unit on.
1. To connect the flexible hose to the unit, insert the hose connector into the air inlet, then take the small
2-prong power cord coming from the hose and plug it into the 2-prong receptacle next to the air intake port.
(Fig1)
WARNING
To reduce the risk of electric shock, the power cord must be disconnected or the
battery removed before removing the dust container, changing the filters or
performing maintenance or troubling shooting checks