Use and Care Manual

- 8 -
6. Air Inlet Vortex Filter
7. Carpet/Floor Brush
8. Crevice Tool
9. Upholstery/Pet Hair tool
10. Dusting Brush
11. Mini Turbo Brush
12. Quick Adjusting Telescoping Wand
13. Squeegee Blade
14. Squeegee Floor Tool
15. ON/OFF Power Switch
16. Additional Tool Storage
17. Easy Access Cord Storage
OPERATION INSTRUCTIONS
Assembling your vacuum
NOTE: Always remove the power plug from the wall outlet before assembling or removing accessories
ATTACHING THE FLEXIBLE HOSE & ATTACHMENT WANDS TO THE VACUUM
The flexible hose should be connected before strapping the unit
1. To connect the flexible hose to the unit slide the hose connector over the air inlet. (Fig 1)
2. To connect the flexible hose the attachment wands, slide the attachment end of the hose connection over the
upper attachment wand. (Fig 2) Then take the upper attachment wand and insert it into the lower attachment
wand. (Fig 3)
2. Plug the power cord into the electric outlet.
3. To remove the flexible hose, unplug the power cord and pull out the hose connector from the air inlet.
4. Pull the handle out from the telescopic tube. (Fig 2)
WARNING
To reduce the risk of electric shock, the power cord must be disconnected before
removing the dust container, changing the filters or performing maintenance or
troubling shooting checks