Congratulations on purchasing your very own Prolux 2.0 Bagless Backpack Vacuum! The Prolux 2.0 is the world’s ONLY bagless backpack vacuum. Because backpack vacuums can cut cleaning time in half, many companies use them to clean commercial buildings. Now you too can enjoy up to 50% less cleaning time! Weighing only 9lbs., and with 125 CFM, this vacuum is over 40% lighter and more powerful than the competition! The Prolux 2.
Table of contents Specifications 3 Optional Accessories 4 Safety Precautions 6 Assembly 8 Getting To Know Your Vacuum 8 Using The Accessories & Tools 11 Operation Operating Instructions/Adjusting The Harness 13 Maintenance Emptying The Dust/Dirt Container 14 Changing/Cleaning The Intake Vortex Filter 15 Changing/Cleaning The HEPA Exhaust Filter 16 Cleaning The Housing 16 Troubleshooting 17 Warranty 19 -2-
Specifications ● Lightweight – Only weighs 9 lbs. ● Powerful 1400 Watt, 12 amp motor ● Amazing 125 Cubic Feet per Minute of Airflow! (Most vacuums only have 80 CFM) ● 95 Inches of Water Lift ● Motor Bypass valve, which adds years of life to the Motor ● 5 Year motor Warranty and 3 Year body Warranty. (90 days on the motor and body if used commercially) ● Cleans twice as fast as standard Upright Vacuums. ● 3-Stage filtration: ○ HEPA H13 Filter, which keeps the air clean with 99.
OPTIONAL ACCESSORIES The Prolux 2.0 StairPro Mini Head – The StairPro is the perfect attachment for cleaning stairs, upholstery, car interiors, and picking up pet hair. Just like the full size power nozzle attachment, the StairPro uses an electrically powered brush-roll to deep clean your carpets and upholstery.
The Prolux Commercial Grade 1-1/2” Tool Attachment Kit – This 1-1/2” tool kit is perfect for cleaning up the garage, or for light commercial use. This tool set includes a larger hose, wands, and tools, so you can pick up larger debris without clogging your attachments, and cover more area in less time, compared to the standard sized attachments.
IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS IN THIS OPERATING MANUAL BEFORE USING THIS APPLIANCE. When using an electrical appliance, basic precautions should always be followed, including the following: Keep the operating manual for reference. Include the operating manual if you pass the appliance to third parties. Violations of the operating instructions can lead to severe injuries as well as damage to the appliance.
Do not vacuum or clean: - Hair and other parts of the body. They could be sucked in and cause injury. - Pieces of Clothing (e, g, shoe laces, scarves, etc.). They could be sucked in and cause injury. - Water and other liquids, especially moisture from carpet cleaning agents. Moisture inside the appliance can lead to short-circuiting. - Toner dust (from laser printers. copying-machines. etc.). There is danger of fire or explosion. - Hot ash, burning cigarettes or matches. This could cause a fire.
GETTING TO KNOW YOUR BACKPACK VACUUM 1. Main Motor Unit 2. Dust Container 3. Deluxe Electric Power Nozzle 4. Shoulder Straps 5. Exhaust HEPA Filter 6. Air Inlet Vortex Filter 7. Quick Adjusting Telescoping Wand 8. Mini Turbo/Pet Tool 9. Crevice Tool 10. Upholstery/Pet Hair tool 11. Dusting Brush 12. Squeegee Floor Tool 13. Squeegee Blade 14. Flexible Hose 15. ON/OFF Power Switch 16. Self-Cleaning Filter Cone 17. Tool Adapter 18. Additional Tool Storage 19. Easy Access Cord Storage 20.
ASSEMBLY AND OPERATING INSTRUCTIONS NOTE: Always remove the power plug from the wall outlet before assembling or removing accessories. ATTACHING THE FLEXIBLE HOSE & TELESCOPIC WAND TO THE VACUUM The flexible hose should be connected before strapping the unit on. 1. To connect the flexible hose to the unit, insert the hose connector into the air inlet, then take the small 2-prong power cord coming from the hose and plug it in to the 2-prong receptacle next to the air intake port. (Fig. 1) 2.
Figure 2 Parts: 1. Deluxe Electric Power Nozzle 2. Extendable Electrical Wand 3.
USING THE ATTACHMENTS CREVICE TOOL Use for cleaning radiators, cracks & crevices along corners, baseboards, and in-between cushions. (Fig. 3) PET HAIR REMOVAL BRUSH The unique design makes it an excellent tool for removing unwanted pet hair from virtually any surface. (Fig. 4) NOTE: This tool is not a grooming tool and should not be used on animals. Caution: DO NOT use the Pet Hair Removal Brush on delicate or woven fabrics that may snag.
CONNECTING THE ATTACHMENTS TO YOUR WAND Connecting the tools to your telescopic wand is quick and easy. The tools use a Friction Fit Connection which means you push the tool on to the wand (or adapter if applicable) and twist in either direction. (Fig.
USING YOUR VACUUM 1. Insert the power plug into the wall outlet 2. Connect hose and telescopic tube if desired. 3. Correctly place shoulder straps on each shoulder and secure the waistband strap. (Fig. 8 through Fig. 8b) Caution: If the waistband and both shoulder straps are not properly and securely in place, the unit could fall off your back, causing damage or injury. 4. Turn the unit on/off by pressing the switch located near the base of the unit. (Fig.
HOW TO EMPTY THE DUST CONTAINER The dust container must be emptied as soon as it reaches the “MAX” mark indicated on the outside of the tank, or if the suction power has dropped. To empty the Dust Container, please follow the instructions below: 1. Switch the vacuum cleaner to the “Off” position and disconnect the plug from the wall outlet. 2. Release the dust container by pressing down the release button. (Fig. 10) 3. Pull the dust container away from the vacuum cleaner. 4.
HOW TO CLEAN AND REPLACE THE Vortex & HEPA FILTERS There are two filters in this unit - the intake Self-Cleaning Vortex filter, and the exhaust HEPA filter. When the filters are too dirty, and the suction power is reduced, you must clean or replace the filters. TO CLEAN AND REPLACE THE VORTEX INLET PRE-MOTOR FILTER: 1. Open the top Vortex chamber cover by rotating the cover counterclockwise. (Fig. 12) 2.
TO CLEAN AND REPLACE THE EXHAUST HEPA FILTER: 1. Open the exhaust cover by rotating it counter clockwise. (Fig. 13) 2. Pull the exhaust HEPA out of the unit. (Fig. 13) 3. Clean the filter using warm water, and allow air-drying completely, and then place the filter back into the unit. Or, if the filter is too dirty, or in an unusable condition, replace the filter with a new one. Fig 13 CLEANING THE HOUSING: WARNING: Always switch off the appliance and disconnect it from the outlet before cleaning it.
Troubleshooting WARNING: Never use a defective appliance. Always switch off the appliance and disconnect it from the outlet or remove the battery before you start to troubleshoot. Fault Possible Cause(s) Solution The vacuum will not turn on. The plug is not connected to the electrical wall outlet or the appliance is not switched to the “on” position. Electrical wall socket does not carry current. Insert the plug into an electrical wall outlet and flip the “on/off” switch to the “on” position.
TROUBLESHOOTING FOR ELECTRIC POWER NOZZLE Problem – electric power nozzle does not power up (motor does not turn on in power nozzle). Solution – Please follow all the steps below and try again: a. Unplug cord from power nozzle on hose, count 20 seconds and plug back in. b. Make sure the brush roll can roll freely and nothing is obstructing it. c. Make sure hose is firmly “snapped” into canister. d. Make sure main electrical wand is firmly “snapped” all the way to the hose. e.
THREE (3) YEAR LIMITED WARRANTY Prolux warranties this product’s motor free from defects in material and workmanship for a period of three (3) years on the motor, and three (3) years on the body of the vacuum, free from manufacturer defects in material and workmanship from the original date of purchase, when utilized for normal household use. Subject to the following conditions, exclusions, and exceptions: What is Not Covered by the Prolux Warranty - Warranty Exclusions.
Product Warranty Registration Please follow the link below to register your Prolux product: https://proluxcleaners.com/pages/warranty For more information on this product, including warranty info and to contact Prolux Customer Service, follow the link below: https://proluxcleaners.
