Manualshelf

Full Product Manual

ManualsBrandsProlux ManualsAppliances2019 Cordless 1 Hour 2.0 Bagless Backpack Vacuum with 1-1/2 in. Commercial Attachment Kit
12345678910
ASSEMBLY AND OPERATING INSTRUCTIONS
NOTE: Always remove the power plug from the wall outlet before assembling or removing accessories.
ATTACHING THE FLEXIBLE HOSE & TELESCOPIC WAND TO THE
VACUUM
The flexible hose should be connected before strapping the unit on.
1. To connect the flexible hose to the unit, slide the hose connector over the air inlet (Fig 1).
2. To connect the flexible hose to the telescopic wand, slide the attachment end of the hose connection
over the lower end of the telescopic wand (Fig 2).
3. To adjust the wand, locate the blue clamp and pull up on the release lever to release tension from
the clamp. Once tension has been released, you can adjust the wand to desired length. If the wand
still does not move, locate and loosen the small set screw on the opposite side of the lever.
4. To remove the flexible hose, turn the vacuum off and pull the hose connector from the air inlet.
5. Pull the handle out from the telescopic wand (Fig 2).
- 7 -