Full Product Manual

SPECIFICATIONS AND PARTS
Charger Specification:
Charger input: 120V 50/60Hz AC only
Charger output: 30V 1A
Battery Specification:
Lithium Polymer chemistry 25.2V
Approximate charge time: 8 hours
Approximate run time for new battery: 30 minutes.
(1 - Battery pack) (2 - Charger)
OPERATION
Charge in a well ventilated area. DO NOT block charger vents. Keep them clear to allow proper ventilation.
CHARGING LITHIUM POLYMER BATTERY PACKS
Lithium Polymer batteries deliver fade-free power for their entire run time. The vacuum will not gradually lose
power due to decreasing battery charge. The vacuum will perform at its normal performance level until the battery
has been depleted. Once this happens, recharging of the battery is required. It is not necessary to drain the battery
pack completely before recharging.
If the charger’s light is not lit at any point during the charging process, remove the battery pack from the charger to
avoid damaging the product. DO NOT insert another battery.
Contact the service center with any issues.
BATTERY PROTECTION FEATURE
The 25.2-volt Lithium Polymer batteries are designed with features that protect the Lithium Polymer cells and
maximize battery life. When the battery has reached its minimum voltage level the electronics will shut off the
battery. Once the battery shuts off, it must be recharged.
- 14 -