Warranty

- 7 -
1. Main Motor Unit
2. Dust Container
3. Flexible Hose
4. Shoulder Straps
5. Exhaust HEPA Filter
6. Air Inlet Vortex Filter
7. Carpet/Floor Brush
8. Crevice Tool
9. Upholstery/Pet Hair tool
10. Dusting Brush
11. Mini Turbo/Pet Tool
12. Quick Adjusting Telescoping Wand
13. Squeegee Blade
14. Squeegee Floor Tool
15. ON/OFF Power Switch
16. Tool Adapter
17. Self-Cleaning Filter Cone
18. Additional Tool Storage
19. Easy Access Cord Storage
OPERATION INSTRUCTIONS
Assembling your vacuum
NOTE: Always remove the power plug from the wall outlet before assembling or removing accessories
n ATTACHING THE FLEXIBLE HOSE & TELESCOPIC WAND TO THE VACUUM
The flexible hose should be connected before strapping the unit
1. To connect the flexible hose to the unit slide the hose connector over the air inlet. (Fig 1)
2. To connect the flexible hose to the telescopic wand, slide the attachment end of the hose connection over the
lower end of the telescopic wand. (Fig 2) To adjust the wand, locate the blue clamp and pull up on the release
lever to release tension from the clamp. Once tension has been released. You can pull the wand in and out to
desired length. If the wand still does not move. Locate the small set screw located on the opposite side of the
lever.
3. Plug the power cord into the electric outlet.
4. To remove the flexible hose, unplug the power cord and pull out the hose connector from the air inlet.
5. Pull the handle out from the telescopic wand. (Fig 2)
WARNING
To reduce the risk of electric shock, the power cord must be disconnected before
removing the dust container, changing the filters or performing maintenance or
troubling shooting checks