Use and Care Manual

- 12 -
more efficient than standard filters and will have the same amount of airflow
whether it’s dirty or clean. The entire surface of the filter will have to be covered in
debris before the performance of the vacuum is affected, and the filter needs to be
cleaned.
Clean and replace the exhaust HEPA filter
1. Open the exhaust cover by rotating in count clockwise. (Fig 13)
2. Put the exhaust HEPA out of the unit. (Fig 13)
3. Clean the filter, using warm water and allow air-drying completely, and then assembling the filter back into the
unit. Or, if the filter is too dirty or in an unusable condition, replace the filter with a new one.
Fig 13
Cleaning the Housing
WARNING: Always switch off the appliance and disconnect it from the outlet before cleaning it. See section "Switching