PROLUX 2.
GETTING TO KNOW YOUR TOOL KIT Assembling your vacuum NOTE: Always remove the power plug from the wall outlet before assembling or removing accessories n ATTACHING THE FLEXIBLE HOSE TO THE VACUUM The flexible hose should be connect before strapping the unit 1. To connect the flexible hose to the unit slide the hose connector over the air inlet. (Fig1) 2.
1. Insert the handle (Fig. 3/1) into the upper end of the telescopic tube (Fig 3/2). 2. Attach the floor nozzle (Fig. 3/3) to the bottom end of the telescopic tube (Fig 3/4). NOTE: Shove all the way together and firmly twist to the right to connect pieces. 3. Adjust the length of the telescopic tube. Press down the release latch on the tube to do this (Fig. 4/1). Then pull the handle of the telescopic tube to extend it to your desired length (Fig. 3/1).
