User manual

Prologix GPIB-USB Controller User Manual
9/15/2009 3
Change Log
Sept 14, 2009 Added ++savecfg command descripion. Corrected maximum value
of read_tmo_ms to 3000 ms.
April 21, 2009 Added ++status command description. Updated ++addr, ++spoll
and ++trg command descriptions to include secondary address.
Added section on binary data transmission.
Mar 1, 2008 Updated ++trg command description.
Dec 22, 2007 Updated USB command terminator description and read_tmo_ms
command description.
Jul 9, 2007 Fixed typo in ++mode command description. Thanks Mike Schulz!
Jul 7, 2007 Added change log.
Renamed PERIPHERAL mode as DEVICE mode in line with
other GPIB literature.
Jul 5, 2007 Initial version.