Setup guide

Configure the DFNT Client 151 Module 6201-WA-DFNT ♦ ProLinx Wireless
High Speed Wireless EtherNet/IP Gateway
ProSoft Technology, Inc. Page 23 of 45
August 12, 2008
4 Configure the DFNT Client 151 Module
In This Chapter
 Complete the ProSoft Configuration Builder Sections ...........................23
 Save and Download the Configuration File to the 6201-WA-DFNT Client
151 ........................................................................................................31
Configuring the Remote Client is done the same way as the Primary Client with a
few exceptions outlined in this section.
1 Remove the cable from the Debug port of the DFNT Client 150 module and
plug it into the Debug port of the DFNT module to be configured as Client
151.
2 With PCB open, expand the 6201-WA-DFNT_151 module selection.
4.1 Complete the ProSoft Configuration Builder Sections
4.1.1 Radio Ethernet Configuration
1 Double click on the selection.