User Manual

Protocol This panel enables you to select an authentication
protocol.
Password This panel is available when EAP-TLS is not selected
(either MSCHAP V2 over PEAP is selected with WEP
or LEAP is selected for CCX). This panel enables you
to enter a login name and password or request that the
driver prompt for them when you connect to a
network.
Personal Certificate This panel is available when EAP-TLS protocol is
selected and enables you to select a certificate for
authenticating the station.
User Name Type in the user name assigned to the certificate.
Browse Select a certificate by clicking Browse.
Server Certificate You can select to enable or disable server certificate.
CCX Configuration
None：You may refer to page 25(WEP Configuration).
-
26 -