Table of Contents Characteristic Functions 1 Important Safety Instructions 2 Technical Specifications 5 The Technical Specifications for Final Product 5 Technical Specifications for TV 6 VGA Display Mode 6 Power Management 6 Packing Listing 6 Installation & Connection 7 Antenna Connection 7 Power Connection 8 Computer Connection 8 HDMI digital port Connection 8 AV1 Video Signal Connection 9 AV2 Video Signal Connection 10 YPbPr/YCbCr Input Connection 11 Position of Control Key
Characteristic Functions 1. LCD panel with no glint and low radiation can ease eyes' fatigue and protect eyes. 2. High-quality LCD panel is adopted with high brightness, high contrast, wide viewing angle, and super fast response time. Super fast response time can greatly eliminate the shadow of moving images. 3. TV/Monitor with two in one and multiple input ports can easily switch among the Modes. 4. De-interlacing image disposal is adopted.
Important Safety Instructions Thank you to choose the LCD TV made by our company, a valuable product with excellent quality and multiple functions. This machine will bring you more audiovisual enjoyment. Its design can insure user s safety. All machine are strictly tested before leaving factory. But incorrect use can lead to electric shock or fire. In order to insure safety and extend its life, please read below regulations carefully before using it and comply with the following safety instructions.
Important Safety Instructions cellar and similar environment. During a thunder rain weather, do not touch the power cord and antenna cable. Please pull out the power line and aerial plugs for preventing thunder and lightning damage to this machine. All cables can be connected or pull out only after power supply is turned off. The power cord must be taken off before you clean the machine. Do not use the liquid cleanser or aerosol cleanser. It is recommended to use a wet soft cloth to clean the machine.
Important Safety Instructions When the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. The machine should not suffer from waterdrop or watersplash, do not place the vessel with water (or other liquids) on it, for like this it is possibly to cause fire or electric shock. The attaching plug should be inserted into the power point completely, otherwise it may cause spark to bring fire.
Technical Specifications The Technical Specifications for Final Product Panel size 32 Max. Resolution 1366 768 Best Resolution 1360 768@60Hz Pixel Pitch 0.51075mm Active Area 697.6845mm Color 16.7M Panel Surface Disposal Anti Glare Power Supply 100V-240VAC 60/50Hz Power Consumption of Speaker 10W+10W Control Area of Remote Control 0.51075mm 392.
Technical Specifications Technical Specifications for TV 1.Supported Systems PAL+SECAM or PAL+NTSC 2.Storage channels: 199 3.TV(RF): 75 Imbalance 4.AV Video-Input: 75 ,1VP-P, RCA 5.AV Audio-Input: 20K , 500mV RMS 6.YPbPr/HDMI Video Input: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p VGA Display Mode No.
Installation & Connection Antenna Connection It is better to use outdoor antenna or CATV cable if you want to watch the colorful and hi-definition pictures. Attention: Please turn off TV power before the outdoor antenna is connected to the TV signal input port. Outdoor antenna can't be located near the high voltage cables. Please pull out the plug of outdoor antenna to avoid thunder shock in thunder weather.
Installation & Connection Power Connection Notes: 1.This machine uses AC 100-240V, 60/50Hz. 2.If a long time at leisure, please disconnect it from power supply. Computer Connection Please connect one end of VGA cord with the output port of the computer (available for both desktop or laptop computer), and another end of VGA cord with the input port of the VGA on its rear cover.
Installation & Connection AV1 Video Signal Connection Through composite cable, connect AV equipment VIDEO output termination to this machine VIDEO input, and AV equipment AUDIO output termination to this machine AUDIO input, respectively. Y Y W R Yellow (VIDEO) W White (AUDIO-L) R Red (AUDIO-R) CVBS, DVD Player or other machine with CVBS/S-Video.
Installation & Connection AV2 Video Signal Connection The connection method is the same as AV1. R W Y Y Yellow (VIDEO) W White (AUDIO-L) R Red (AUDIO-R) CVBS, DVD Player or other machine with CVBS/S-Video. Earphone Socket: The TV speakers will be shut off when earphone is inserted into this socket.
Installation & Connection YPbPr/YCbCr Input Connection If the signal source is DVD, Digital wired receiver or equipments with the YPbPr/YCbCr output, recommends you to connect YPbPr or YCbCr output with the TV YPbPr/YCbCr input. In order to obtains the better picture quality, at the same time, please connect its audio output with TV audio input as shown in the following chart. If you choose the YPbPr/YCbCr signal, please set signal source selection under YPbPr pattern.
Position of Control Keys Front Panel Control Keys 3 4 5 6 7 1 2 1) Power Indicator. 2) Remote Receiving Sensor. 3) SOURCE: Press this key to enter the menu of signal source and choose signal source. 4) CH+/CH-: Press these two keys to select the channel, and adjust the options you need under OSD operation. 5) VOL+/VOL-: Press these two keys to add or reduce volume, and adjust the analog value under OSD operation. 6) MENU: Press this key to enter main menu. 7) Power switch .
Remote Control POWER MUTE Power Mute Numerical key F1 Program list Freeze picture SMART S SMART P Smart sound Smart image OK OK Cursor Key Menu MENU Volume VOL CH Channel SOURCE Source Info Time 16:9 INFO Zoom Return COLOR Color P/N AUDIO Color system Telecontrol battery installation method Take off the cover of battery box, fix two AAA batteries with 1.5 volt, and conform with the polarity of remote control battery box.
Remote Control Remote Control Key Instruction Key POWER MUTE Numerical key F1 Program list MENU SMART S SMART P SOURCE Cursor key VOL+/VOLCH+/CHINFO Time Return 16:9 Color P/N AUDIO OK Function Turn on or standby Eliminate sound Number input button Freeze picture Look through or edit Program list Press this button to display menu Intelligent sound mode selection: STANDARD, NEWS, MUSIC, PERSONAL Intelligent image mode selection: STANDARD, DYNAMIC, SOFT, PERSONAL Press this button to display signal source se
Basic Operation Instruction Power On Plug power cord into the electrical socket and press '' '' key on the front panel, then press '' '' key on the remote control to turn on the TV. Standby Press ''Power''key on the remote control. TV will be in standby. Special Attention: 1.TV set will automatically turn to standby if there is no signal input for 5 minutes when TV turns on. 2.TV set will automatically turn to standby when the preset time of turning off reaches.
Basic Operation Instruction Press ''Source''key to display the signal source menu or exit signal source menu. 6. During the operation, the selections which can not be adjusted at current mode will be hidden automatically and the color of the selections will be changed into gray. 7. Menu Operation Instruction in this manual is explained according to TV mode. The operations in other modes are similar to the one in TV mode. Users can take it as reference. PICTURE Select to enter the PICTURE submenu.
Basic Operation Instruction SOUND Select to enter the SOUND submenu. Press " Up/Down " key on the remote control or the key "CH+/CH-" on the front panel to choose what you need. Press the "Left / Right" key on the remote control or the "VOL+/VOL-" key on the front panel to adjust analog value or state (see below table). SOUND 50 50 50 BASS TREBLE BALANCE SOUND MODE STANDARD SEL ADJ MENU EXIT Special Attention 1. Normally, 50 value of adjustment is recommended; 2.
Basic Operation Instruction Option Function OSD-H POSITION Adjust H-position of OSD menu OSD-V POSITION Adjust V-position of OSD menu OSD-DURATION Adjust duration of OSD menu OSD-HALFTONE Adjust halftone of OSD menu Description Increasing analog value, OSD menu move toward right; Decreasing analog value, OSD menu move toward left (0-100). Increasing analog value, OSD menu move toward down; Decreasing analog value, OSD menu move toward up(0-100).
Basic Operation Instruction Option Function Description COLOR SYSTEM Select color system "PAL, NTSC, AUTO" three modes. SOUND SYSTEM Select sound system "I, D/K, M, AUTO, B/G" five modes. MTS Select MTS modes "STEREO, MONO, DUAL , DUAL SKIP Select skip or not "ON/OFF" two states.
Basic Operation Instruction CHANNEL EDIT Select to enter the submenu of TV. Then press ''Up/Down'' key on the remote control or ''CH+/CH-'' on the front panel to select ''CHANNEL EDIT''. Press ''Right'' key on the remote control to enter submenu of ''CHANNEL EDIT'' (Press program list key on the remote control to enter submenu of ''CHANNEL EDIT'').
Basic Operation Instruction PIP Select to enter the PIP submenu. Press "Up/Down" key on the remote control or "CH+/CH-" key on the front panel to choose what you need. Press the "Left/Right"key on the remote control or the "VOL+/VOL-" key on the front panel to adjust analog value or state (see below table).
Simple Troubleshooting Factor Solution Snowflake speckle and sound noise. 1.Antenna cable connector is loose, cable is damaged. 2.Channel setting is incorrect. 3.Antenna cable type is not matching. 4.Direction or position of antenna cable is incorrect. 5.Signal is weak. 1.Check the antenna cable connector plug whether or not loose, cable whether or not perfect. 2.Refer to channel setting method, resetting again. 3.Check antenna cable type(VHF/UHF) 4.Adjust direction or position of antenna cable . 5.
