User Manual

Section 3 Other functions of OSD
1. Monitor State Explanaon
● When there is no Analog or Digital input source, the screen will display as No
Signal.
2. Low voltage protecon instrucon
● When a low voltage of 5V DC is connected
(through USB-Powered cable), OSD will
display insucient power indicator.
● You can press
within the me limit to
decrease the brightness to reduce the USB
load.
● When the USB load is reduced to within
the USB-Powered specicaon, the
insucient power indicator on the OSD
will disappear.
● If the USB load is not reduced within the
me limit, the system will reduce the
brightness to 50% in order to reduce the
USB load.
● If the USB load is sll not reduced to
within the USB-Powered specicaon, the
system will further reduce the brightness
to 25% to reduce the USB load.
Scenario Monitor State
System is launched without Digital or Analog input source
Displays PROLiNK protecon
screen
System is launched but the video signal input source is
incorrectly set in the OSD. The actual connected Digital or
Analog input source diers from the seng.
All black; LED indicator is red
System is launched with Digital or Analog input source,
and the video input source is correctly set in the OSD.
Displaying input source; LED
indicator is green
System shuts down All black
19